Easy Basic Kitchen Faucet Repair

Need help with Commercial Refrigerator Repair again? If you would rather do it yourself and invest a couple bucks on a couple replacement pieces, this may be of assistance to you personally.

Replacing a typical leaky faucet can be as easy, depending of course on what is causing the leak. Generally, but the seals inside the unit have worn out of use and no longer seal nicely enough. This problem is a simple fix as long as you’ve got the ideal tools ‘ an Allen wrench, a channel lock or vice grip pliers, and a pair of needle nose pliers. A new pair of screws, seals, and a metal ball can be found at any local hardware store.

First and foremost it is very important to shut off both cold and hot water lines before eliminating the faucet. Begin by removing the grip of the device and exposing a metal casing indoors. To do so, lift the grip all of the way up to see a screw which needs the Allen wrench. Loosen and remove the screw in addition to the handle. The metal housing can be taken away as well but first use the station lock/vice grip pliers to twist the foundation of the housing to loosen it.

Once that has been removed you’ll be able to access the mechanism which operates the ball and utilizes the seals. Pull out the mechanism from the stem and you will find your seals. Typically they are black rubber/plastic and therefore are quite inexpensive (roughly 5 bucks) in most hardware stores. These seals are exactly what needs to be substituted, Restaurant Equipment Repair Atlanta, and the springs add pressure.

Use the needle nosed pliers and pull directly up on the seals to remove them. Replace them exactly the exact same way using the pliers to push into the slot. If you purchased a new ball which is always a good idea then which may be replaced with the older one. Ensure when you put everything back together that every hole lines up correctly, this really is important. Lubricating the seals and ball Vaseline is a good way to make things work smoother.

Image result for Kitchen

Replace the stem mechanism and then tighten the bottom of the unit with the vice grip pliers. Put the handle back on the stem and tighten the Allen wrench. Turn the water lines on and gradually push the handle up to be sure water comes through. Ensure the warm water is hot and the cold is cold (it’s possible to combine up the two with kitchen faucet fixes).

Top Tech Mechanical is a Commercial Restaurant Kitchen Repair Company in Atlanta serving all of the Metro Atlanta area. If you re in need of Restaurant Equipment Repair including refrigerators, freezers, stoves, ovens and more then call us today.