Fuji Mini Mite 4 Inspection

The Fuji Mini Mite series is as good as the premier product series from Fuji — the Q Platinum series. They have the same features except for the sound reduction technology utilized on the Q series along with the speed control knob of the turbine with Q5. It is noisy but costs less than the Q series.

The Fuji Mini Mite 4, using its 4 fan turbine can produce 9 PSI of pressure for atomization and an excellent finish. The strain is good enough for viscous paint with no much thinning.

Image result for Fuji Mini Mite

All the sprayer system from Fuji come with a typical 25-foot hose, so the turbine can be put away from the work area. And this is extremely much recommended as the overspray paint might be sucked in by the filter, necessitating regular cleaning.

Did I mention, they have an excellent customer support?

Fuji Mini Mite 4 Features

Impact Type: Gravity / Bottom (Siphon) Feed
Pressure Rating: 9 PSI / Bar
Sprayer Type: HVLP
Air Cap: 1.3mm (supports 0.8, 1.0, 1.3, 1.5, 1.8, 2.0 and 2.5 mm)
Cup Capacity: 600 cc / 21-fl. Oz
Max Rate: GPH (gallon per hour)
Motor/Pump: 4 stage pump
Min/Max Fan Pattern: 1 — 15 inches from 8 inches distance.
Air Filter: Platinum Dual Filter #7224-2
Weight: 23.6 pounds (10.7 kg)3 Model of Fuji Mini Mite Platinum Series

There are 3 models of the Mini Mite series of Fuji Sprayer system: the Mini Mite 3 with 3 turbine lovers, the Mini Mite 4 with 4 turbine fans and the Mini-Mite 5 with 5 telescope lovers. Every one of those models also come in different packages that have different gun versions with the toaster system.

What’s Different

Included with Min Mite 5 is 5-for-5 Bonus Kit: 6′ Whip Hose, Wet Film Gauge, 19 computer Spray Gun Cleaning & Maintenance Kit with Lubricant, Extra Turbine Filter,”Always Measure” Booklet — Record your material preparation and results.

What’s 3 Stage, 4 Stage5 Stage Motor

The 5-stage engine of the Mini Mite 5 model produces 9.5 PSI for finer atomization and increased finish. The Mini-Mite 4 model produces 9 PSI and Mini Mite 3 produces 6 PSI of pressure. The higher the pressure the more viscous materials could be sprayed with it.

The number”4″ from the name”Fuji Mini Mite 4 Platinum” stands for variety of fans the sprayer system telescope motor has. So Min-Mite 3 includes three motor enthusiasts along with the Min-Mite 5 has five. A platform with more buffs costs more. Besides the purchase price , what does more enthusiast mean to youpersonally?

First off, more enthusiasts mean more stress, as mentioned earlier. The 3-stage motor spins faster than the 4 stage motor along with the 4-stage motor spins faster than 5 stage and so forth. Faster rotation means more wear and tear which means more breakdowns and more expense for maintenance. It also means more downtime and potential business loss — loss of revenue.

Pressure Rating

More fans create more pressure and the speed where you paint. The Min-Mite 3 produces 6 PSI, Min-Mite 4 generates 9 PSI and the Min-Mite 5, 9.5 PSI. At higher PSI the paint is atomized finer for more professional end and can spray more viscous materials.

Common Capabilities

Aside from the above-mentioned differences, there are numerous common features of the Mini-Mite series. The”Platinum” means it is the best product in this kind of paint sprayer system from Fuji.

Noise Reduction Covers (NRC)

The three versions have the Noise Reduction Covers (NRC) that reduces the noise made by the turbine.

Ambient air is entrained only from the trunk effectively removing any Direct Sound Paths. Air is drawn through specially designed’Finger Slots’ for optimum functionality.

Heat Dissipation Chamber

Turbines of this Sprayer System create a lot of warmth and it builds up in the toaster. Fuji Spray has designed a technique that eliminates the extra heat by channeling it to the Heat Dissipation Box situated in the back of the situation. Hot air is dissipated evenly via an optimum surface area using 60 holes, there’s no added hiss or loud whistling sound. The result is a cooler operating temperature and also a longer lifetime for the system compared to other regular systems.

Each of the 3 models of the Mini-Mite System support 3 different models of spray guns. The three versions of the spray guns are:

T-Model� — T70
T-Model� — T75G
G-XPC�

The”G” in the model implies the rifle is a gravity gun. Siphon fed T70 has a cup capability of 1 Quart (1000cc) and includes a 1.3mm Air Cap. The T75G is a gravity gun with a power of 0.63 Quart (600cc) and also comes with a 1.3millimeter Air Cap. And the GXPC includes a capacity of 0.42 Quart (400cc) comes with 1.4mm Air Cap.

The T-Model� provides an enhanced spray pattern for exceptional performance. The new sleek design is ergonomic and nicely balanced.

The G-XPC, T-Model — T70 and also the T-Model� — T75G non-bleed Gravity Spray Gun features an exclusive side Pattern Control Knob to adjust the Fan Size. The Fan Pattern is adjustable from 1″ to 15″ from 8″ distance.

Other Capabilities

They all come with a 25ft Hi-Flex Hose with Quick-Connect, Air Control Valve, User Manual, Viscosity Cup, Wrench, and Cleaning Brush. The machine runs on both 110-120 V and 220-240 V electricity.

Paint Type Supported

Paint Types: Most kinds of paints are supported such as Nitrocellulose lacquers, sealer, cellulose, acrylics, synthetics, polyurethane, stains, varnish, primers, water-based finishes, oil-based paints, urethanes, enamel, latex and many more. Please consult with the Air Cap Set Information to see that which Cap size supports that kind of paint.

Customer Satisfaction

If you take a look at the average evaluation of the product, you may Know that the customers who used the product were very happy with it. The majority of the people loved the minimal overspray that they experienced when they went for latex. The results were so great and also this product turned out to be a massive time saver for them. The end obtained was also perfect. The instrument was shown to be very advantageous for the DIYers who have been searching for a professional finish in their job.

The hosepipe that comes with the machine is flexible but somewhat stiff When you’re going to be doing any inside cottage function. The Fuji 2049F 6-Foot flexible whip hose is your solution. The Whip hose is quite lightweight and flexible. It can twist and bend any sharp and difficult corner, making your gun much more pliable.

It’s made from glass fiber-reinforced polymer. This lightweight Substance requires the weight off your wrist letting effortless maneuverability of the of the spray gun.

This extra length of 6 feet Together with the provided 25 feet Allows for further cooling of the air as it travels a longer distance in the turbine. This often alleviates problems with rapid drying lacquers (and Latex House Paint) drying too quickly.

This particular whip hose is also compatible with other HVLP sprayer systems from some other brands.